From: Phil Elwell <phil@raspberrypi.org>
Date: Mon, 23 Jan 2017 17:36:50 +0000 (+0000)
Subject: BCM270X_DT: Add reference to audio_pins to CM dtb
X-Git-Tag: archive/raspbian/4.9.13-1+rpi1~8^2~66
X-Git-Url: https://dgit.raspbian.org/%22http://www.example.com/cgi/%22/%22http:/www.example.com/cgi/%22?a=commitdiff_plain;h=755d112540fcd32da49b8ff44143861f854cb2af;p=linux-4.9.git

BCM270X_DT: Add reference to audio_pins to CM dtb

The CM1 dtb contains an empty audio_pins node, but no reference to it.
Adding the usual pinctrl reference from the audio node enables the
audremap overlay (and others) to easily turn on audio.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
---

diff --git a/arch/arm/boot/dts/bcm2708-rpi-cm.dts b/arch/arm/boot/dts/bcm2708-rpi-cm.dts
index eb8662f0d222..10be69972bd1 100644
--- a/arch/arm/boot/dts/bcm2708-rpi-cm.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts
@@ -85,6 +85,11 @@
 	pinctrl-0 = <&i2s_pins>;
 };
 
+&audio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_pins>;
+};
+
 &hdmi {
 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
 };